Installation guide for the Termite Meter™

Choosing the placement of the Termite Meter is decided by where you are most concerned about termite activity, according to your house layout and construction. Suggested placement is 10 - 20 feet apart and about 3 feet from the house foundation. Before beginning installation locate any underground utilities or sprinkler lines.

	Step 1	From a standing position, after station placement has been decided, attach the 1 7/8" auger bit to your drill. The depth of the hole is best kept to when the top of the auger fluting has become flush with the ground.
	Step 2	From a standing position, attach the Termite Meter™ to the Stand up Inspector Tool and guide the meter into the hole and push downward until the meter collar is flush with the ground. If soil is dry and/or hard you may also place your foot on top of the meter and push downward.
Inspection guide for the Termite Meter™
	Step 1	From a standing position, simply align the groove on the bottom of the Inspector Tool with the fin on top of the insert. Push down slightly to make sure the tool is seated firmly. Twist the Inspector Tool until the half-moon notches on the insert are aligned with the tabs on the meter casing.
	Step 2	From a standing position, lift the insert up out of the casing and inspect the insert for termite activity. Avoid touching the insert to keep human smell from contaminating the insert. Visually inspect for any termite activity. Return or replace the insert and twist until the half-moon notches are no longer lined up with the tabs, this will secure the insert in place.

Home  │  Dealer  │  Product Line  │  Order Page  │  Installation  │  Contact

© Termite Meter Manufacturing, Inc. All rights reserved.